White stucco period terrace of apartment buildings
Columned entrance porch of a period apartment building
Stucco-fronted apartment building with balconies, iron railings and window boxes

Door-by-door inspection and reporting

Fire Door Inspections in Dorset

Bournemouth · Poole · Dorchester · Across Dorset

Every fire door inspected, photographed and reported on individually, with repairs or replacement doorsets carried out by the same specialist team.

Period residential terrace

01 / 03
White stucco-fronted residential building with balconies and iron railings Close-up of a push bar and frame edge on a fire door

Why fire doors are inspected

A fire door only works if every part of it works

A fire door is a complete assembly: the leaf, frame, seals, hinges, closer, glass and hardware all have to be right for it to hold back fire and smoke for its rated time.

Everyday wear quietly undoes that. Gaps open up, seals get painted over, closers are disconnected and doors are wedged open. A fire door inspection finds these faults before a fire does, and gives the responsible person a written record that the doors are being looked after.

We carry out fire door inspections across Dorset for landlords, housing providers, freeholders, managing agents, facilities teams and property managers. Because we also carry out the remedial work, our reports are written to be acted on, not just filed.

The inspection

What we check on every fire door

Each door is inspected on its own and given its own record. These are the eight areas we look at, and the faults we most often find in them.

  1. 01

    Leaf and frame

    We look for splits, warping, poorly filled holes and alterations such as added cat flaps or letter plates, and record any label or plug that shows the door’s rating.

  2. 02

    Gaps

    Gaps are measured along the head, both long edges and under the door, then compared with the tolerances allowed for the doorset in question.

  3. 03

    Intumescent and smoke seals

    Both kinds of seal should run unbroken around the leaf or frame, undamaged and free of paint. Where a drop-down seal is fitted, we check that it drops.

  4. 04

    Hinges

    We count the hinges, check their type and condition, make sure every screw is present and tight, and note any sign that the leaf has sagged.

  5. 05

    Self-closing device

    Released from any angle, the door should shut fully and latch on its own. We also note closers that leak oil, are damaged or are working loose.

  6. 06

    Vision panels

    Fire-rated glass should be intact and held firmly, with its beads and glazing seals present and in good order.

  7. 07

    Locks, latches and handles

    Hardware should work smoothly, be fixed securely and be of a type that is suitable for a fire door.

  8. 08

    Signage

    Each door should carry the right mandatory sign, for example “Fire door keep shut”, in a readable condition.

Book a Fire Door Inspection

Available throughout Dorset, Monday to Friday.

Who we inspect for

Fire door inspections for Dorset buildings

Our clients are the organisations and people who look after buildings, from one block of flats to a portfolio spread across the county.

Blocks of flats

Communal doors, riser cupboards and flat entrance doors in purpose-built and converted blocks.

HMOs and landlords

Fire doors in houses in multiple occupation and converted residential buildings.

Schools and colleges

Corridor, stair and classroom fire doors across education estates.

Care and healthcare

Fire doors in care homes and healthcare premises, where doors see heavy daily use.

Commercial premises

Offices and other commercial buildings, for owners and occupiers.

Managed portfolios

Several buildings for one managing agent, property manager, freeholder or housing provider.

How it works

From the first visit to a finished file

An inspection is the first step. If remedial work is needed, the same team prices it, carries it out and documents it, so nothing is lost between contractors.

  1. Site inspection

    We visit the building in Dorset and look at every door in scope. If a fire door survey already exists, we can work from that instead.

  2. Door-by-door report

    Each defect is logged digitally against its door, with photographs, so you can see exactly what was found and where.

  3. Costed scope

    The report becomes a priced schedule that separates doors we can put right from doors that need replacing.

  4. Remedial works

    If you go ahead, we carry out the repairs and fit any replacement doorsets, photographing each door before and after.

  5. Handover

    Completed records come back to you, matched to each action in the FRA or survey, ready to file.

Fire door surveys

Got a door survey full of actions?

You do not need a new inspection to get the faults fixed. Send us the survey or Fire Risk Assessment and we will price the door actions in it, check anything that needs confirming on site and carry out the work.

Useful to include

  • Fire door survey
  • Fire Risk Assessment
  • Schedule of works
  • Door photographs
  1. 01We go through each door action in the report
  2. 02A site visit is booked if anything needs checking
  3. 03You get a priced list of the remedial works
  4. 04The work is done and recorded door by door
White corner apartment building with wrought-iron balconies

After the inspection

Failed doors are not always new doors

A door that fails inspection can often be brought back into line, as long as the repair suits that doorset. We look at that first and only recommend a replacement where it is genuinely needed.


Typical repairs

  • Adjusting gaps back within tolerance
  • New intumescent and smoke seals
  • Replacing worn or unsuitable hinges
  • Adjusting or replacing overhead closers
  • Fitting or adjusting drop-down seals
  • Repairing or replacing locks and handles
  • Repairs to the leaf and frame
  • Fitting the correct fire door signs

When a door has to be replaced

We supply and install fire-rated doorsets with the compatible parts each one needs, and keep installation records for your file. The required rating comes from the fire strategy or Fire Risk Assessment for the building.

FD30

30 minutes’ fire resistance

FD30S

30 minutes, plus smoke seals

FD60

60 minutes’ fire resistance

FD60S

60 minutes, plus smoke seals

The rules

Fire door inspection intervals

For blocks of flats in England taller than 11 metres, the law sets a minimum: communal fire doors once a quarter and each flat entrance door once a year, on a best-endeavours basis.

For other buildings, the Regulatory Reform (Fire Safety) Order 2005 expects fire doors to be maintained so they work as intended, and the Fire Risk Assessment should state how often they are checked. Doors in busy corridors, schools and care homes usually need looking at more often than doors that are rarely used.

Read the full guide
Minimum fire door checks by building type
BuildingMinimum checks
Flats over 11m: communal doorsOnce a quarter, as a minimum
Flats over 11m: flat entrance doorsOnce a year, as a minimum (best endeavours)
Other premisesAs set by your Fire Risk Assessment

Pricing

What affects the cost of an inspection

Every building is different, so we quote for each one rather than publish a price list. These are the things that make the difference.

  1. How many doors

    A small block’s communal doors and a whole estate’s flat entrance doors are very different jobs, so the door count is the starting point.

  2. Access to each door

    Common parts can usually be done in one visit. Flat entrance doors need residents to be in, which may mean appointments or return visits.

  3. Type of doorsets

    Double doors, glazed doors, doors with fanlights or side panels and doors on hold-open devices all take longer to inspect properly.

  4. What you already have

    If a recent survey or FRA exists, we may be able to price remedial works from it rather than starting from scratch.

  5. Where the building is

    We cover the whole of Dorset and plan visits to suit the location and the number of buildings involved.

Your records

What you receive

You need to be able to show what was found, what was done and when. Our paperwork gives you that trail, door by door.

  • Digital inspection report
  • Photographs of every defect
  • A record for each door
  • Before and after photographs of remedial work
  • Product and system details where they apply
  • Installation records for new doorsets
  • Completion documents or certification as appropriate
  • Cross-references to each FRA or survey action

Recent fire door work

Fire door projects we have completed

Recent residential and mixed-use buildings in which our team has completed fire door work, each one inspected, put right and documented door by door.

Period apartment building where First Stop Solutions fitted a fire-rated double doorset
01 / 04

New riser cupboard doorset

Communal area · Fire doors

In the communal area we formed a new cupboard for the electrical riser and hung a fire-rated double doorset on it. Its gaps, hinges and intumescent strips were checked before sign-off, with photographs at every stage from the framing on.

Pillared entrance of a converted period building, a fire door project by First Stop Solutions
02 / 04

Period conversion

Residential · Fire doors

Fire door works in a converted period building, photographed throughout and handed back with documentation.

Residential mansion block, a fire door project by First Stop Solutions
03 / 04

Flat entrance door remedials

Mansion block · Fire doors

Inspecting a flat entrance door, we found a missing third hinge, broken intumescent strips, uneven gaps and a hole in the leaf. All were put right on the same visit; the door passed, and we advised adding an overhead closer.

Red brick mixed-use block, a fire door project by First Stop Solutions
04 / 04

Communal fire door remedials

Mixed-use block · Fire doors

A communal fire door needed work: we adjusted its gaps and closer, fitted new hinges and new intumescent strips, and added a lipping to the bottom edge before photographing it and signing it off.

Training and competency

Approved by UK Fire Door Training for fire door inspection, installation and maintenance.

UK Fire Door Training Approved Inspector UK Fire Door Training Approved Installer UK Fire Door Training Approved Maintainer

Where we work

Fire door inspections across Dorset

We inspect fire doors throughout the county, from the Bournemouth, Christchurch and Poole conurbation to the market towns and coast of west and north Dorset.

  • Bournemouth
  • Poole
  • Christchurch
  • Dorchester
  • Weymouth
  • Portland
  • Bridport
  • Lyme Regis
  • Swanage
  • Wareham
  • Wimborne Minster
  • Ferndown
  • Verwood
  • Blandford Forum
  • Shaftesbury
  • Gillingham
  • Sherborne
  • Sturminster Newton

If your building is not listed, tell us where it is and we will confirm when we can visit.

Questions

Fire door inspection FAQs

Answers to the questions we are asked most by people looking after buildings in Dorset. If yours is not here, ask us.

Ask a question

Which parts of Dorset do you cover?

Yes. We inspect fire doors in residential, commercial and public buildings throughout Dorset, from Bournemouth, Poole and Christchurch to Dorchester, Weymouth, Bridport, Sherborne and Shaftesbury.

Tell us where the building is when you get in touch and we will arrange a suitable date for the visit.

What is checked during a fire door inspection?

Each door gets its own inspection covering eight areas: leaf and frame, gaps, intumescent and smoke seals, hinges, the self-closer, glazing, hardware and signage.

Every defect is logged with a photograph against the door it belongs to, so nothing is left vague.

Is there a set interval for fire door inspections?

That depends on the type of building. Blocks of flats in England taller than 11 metres need their communal fire doors checked at least once a quarter, and flat entrance doors at least yearly on a best-endeavours basis.

Elsewhere, the interval comes from the Fire Risk Assessment. Our guide to fire door inspection frequency explains the rules in more detail.

Who is responsible for having fire doors inspected?

The “responsible person” under the Regulatory Reform (Fire Safety) Order 2005. That is usually the employer, building owner, landlord, freeholder or managing agent in control of the premises.

In blocks of flats this covers the communal areas and the flat entrance doors, which separate each flat from the common parts.

Can you repair the doors that fail, or only report on them?

We can do both. Many failed doors can be brought back into line with work such as gap adjustment, new seals, hinges or closers, where the doorset allows it.

If the leaf or frame is beyond repair, we supply and fit a suitable fire-rated replacement, such as an FD30S or FD60S doorset, as specified for the building.

Can you price remedial work from an existing survey?

Usually, yes. Email the survey or FRA along with the address of the property. We go through each door action, visit if anything needs confirming, and send a costed schedule of works.

How much does a fire door inspection cost?

There is no fixed price, because the cost depends on how many doors there are, how easy they are to reach, the types of doorset and where the building is.

Tell us about the building and we will give you a quotation before any work is booked.

Are your inspectors qualified?

First Stop Solutions is approved by UK Fire Door Training for fire door inspection, installation and maintenance.

Book an inspection

Fire door inspections anywhere in Dorset

Tell us about the building and how many fire doors it has. You’ll get a quotation and a choice of dates from us.

Already have a report? Send us your

  • Fire Risk Assessment
  • Fire door survey
  • Scope or schedule of works
  • Photographs of the doors

Get in touch

Start your enquiry

How can we help?

One quick step

Your details

We only use these details to reply to you. Privacy policy

Get in touch

Start your enquiry

How can we help?

One quick step

Your details

We only use these details to reply to you. Privacy policy